Author Topic: SAMSUNG SM-G360G UNLOCK Done by z3x  (Read 39 times)


0 Members and 1 Guest are viewing this topic.

Offline ouch samnang

  • អ្នកសំរបសំរួលទូទៅ
  • សមាជិកថ្មី
  • *****
  • Topic Author
  • Join Date: Jun 2018
  • Location: Battambang
  • Age: 35
  • Posts: 47
  • Thanked: 39 times
  • Gender: Male
    • View Profile
« on: June 14, 2018, 06:45:21 PM »
     Micro-USB cable:
  1. Phone must be powered on.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Type *#9090# and choose 'DM/DUN over HSIC'.
  4. Reboot phone.
     Or use 'Activate Diag' function from 'Repair' tab.
  5. Connect USB cable, install drivers if needed.
  6. Select Samsung diagnostic port in port settings.
  7. Press 'Unlock' button for direct unlock.
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock
Selected model: SM-G360G
Selected port: COM146 SAMSUNG Mobile USB Serial Port
Software version: 32.7

Reading phone info...
Reading IMEI... OK
IMEI: 35609006373xxxx
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.32.7